Release_Notes_Generic_Remote_Control_1_2_8_0

Waves System Release notes Generic Remote Control software October 2021

Version history
Shortcut List
System Requirements
Installation

Generic Remote Control 1.2.8.0

October 2021

Added new commands for the serial and TCP/IP preset of the Event Video Player - EVP380 and the My Video Player - VP3xx:
- Subtitles management (Firwmare 1.08 or higher):
  - ON: Enable the automatic subtitles selection based on system settings,
  - OFF: Disable subtitles,
  - Previous: Select previous subtitles track (without wrap around),
  - Next: Select next subtitles track (without wrap around),
  - Previous (with wrap around): Select previous subtitles track (with wrap around),
  - Next (with wrap around): Select previous subtitles track (with wrap around),
  - ISO639-2 (B): Select subtitles with the language code ISO-639-2 (B) “bibliographic”,
  - ISO639-2 (T): Select subtitles with the language code ISO-639-2 (T) “terminological”,
  - ISO639-3: Select subtitles with the language code ISO-639-3,
  - Index: Select subtitles with the track index,
  - Request information to get the list of the available ISO-639 language codes (Get the list of subtitles). Separated by semicolons and terminated by a CRLF, ex: eng;ara;nld.
- Switching on and off the HDMI-CEC compatible display devices (Firwmare 1.11 or higher):
  - HDMI-CEC Standby: Standby of the display device,
  - HDMI-CEC Wakeup: Wakeup of the display device,
  - HDMI-CEC Standby/Wakeup: “Toggle” Standby/Wakeup of the display device.
- Switching on and off the PJLink compatible video projectors (Firwmare 1.11 or higher):
  - PJLink Video Projector Power On: power off the video projector,
  - PJLink Video Projector Power Off: power on the video projector.
Updated contact information and external links.

Generic Remote Control 1.2.7.0

July 2020

Added new baudrate values for the Event Video Player - EVP380 (Serial) and the My Video Player - VP3xx (Serial):
- 1200 baud
- 2400 baud
- 4800 baud
Added new date/time setting commands for the serial and TCP/IP preset of the Event Video Player - EVP380 and the My Video Player - VP3xx:
- NTP on: enable NTP
- NTP off: disable NTP
  - Set time: set the time from the system time
  - Set date: set the date from the system date
  - Set date/time: set the date/time from the system date/time
  - Set UTC/GMT date/time (epoch version): set the date/time from the system “epoch” reference
  - Set UTC/GMT date/time (full version): set the date/time from the system UTC/GMT date/time

Generic Remote Control 1.2.6.0

February 2020

Added the following device to the list of available devices:
- Micro AMP 1

Generic Remote Control 1.2.5.0

April 2019

Added the following devices to the list of available devices:
- My Music Player (Serial)
- My Music Player (LE) (TCP/IP)
Fixed some minor bugs.

Generic Remote Control 1.2.4.0

March 2019

Added the following devices to the list of available devices:
- Event Video Player - EVP380 (Serial)
- Event Video Player - EVP380 (TCP/IP)
Fixed a bug which prevents the ID-AL web site links from working.
Fixed some minor bugs.

Generic Remote Control 1.2.3.0

July 2018

Added the following devices to the list of available devices:
- VP3x0 for serial and TCP/IP
- Event Player mkII
- Micro Player mkIII
Added of a section for sending various commands: Other Command for the supported devices.
Added of toggle buttons: Standby/Wakeup and Mute/Unmute for the supported devices.
Added a keyboard shortcut for the toggle command Mute/Unmute for the supported devices.
Added Next folder, Previous folder, Volume + and Volume - commands to the following devices:
- Micro Player mkII/III (firmware 1.5 ou higher)
- Chrono Player (firmware 1.2 ou higher)
- Event Player (mkII) (firmware 2.03 ou higher)
Dynamic management of connections and disconnections in TCP/IP.
Replaced the icons theme of the main menu of the application.
Fixed some minor bugs.

Generic Remote Control 1.2.0

July 2017

Extended the Event Player range of playable folders (firmware 2.02 ou higher). From the folder 000 to the folder 999.
Added the Micro Player to the list of available devices.
Added the Flash MPX HD to the list of available devices.
Added the VP100HDi to the list of available devices.
Fixed some minor bugs.

Generic Remote Control 1.1.0

June 2017

Added the Chrono Player to the list of available devices.
Added the VP200HD(i) - VP250HD(i) to the list of available devices.
Added the VP250HD - TCP/IP to the list of available devices.
Added new playback commands Next folder and Previous folder for the supported devices.
Added new Request commands for the supported devices.
Added TCP/IP commands for the supported devices.
Added display options for Command Bytes Sent (hexadecimal or decimal).
Added Data Received view section.
Added display options for Command Bytes Sent (ASCII, hexadecimal or decimal).
New user interface.
New icon and a new logo to the application.
Fixed a few bugs regarding the execution of the application with Windows 7/8/8.1/10.
Fixed some minor bugs.

Generic Remote Control 1.0.0 - Main Characteristics

March 2013

Management multiple types of players.
Automatic detection of available COM ports.
Automatic connection function to selected COM port.
Automatic save of the selected settings.
Management of player ID
Playback commands, volume control and folders playback.
Supported languages : English and French.

Generic Remote Control 1.2.0 - Shortcut List

Application
`Ctrl`+`Q`	Quit

Command
`Ctrl`+`0`	Play folder 000
`Ctrl`+`1`	Play folder 001
`Ctrl`+`2`	Play folder 002
`Ctrl`+`3`	Play folder 003
`Ctrl`+`4`	Play folder 004
`Ctrl`+`5`	Play folder 005
`Ctrl`+`6`	Play folder 006
`Ctrl`+`7`	Play folder 007
`Ctrl`+`8`	Play folder 008
`Ctrl`+`9`	Play folder 009
`Ctrl`+`+`	Increase volume
`Ctrl`+`-`	Decrease volume
Multimedia key : `Play`	Resume the playback
Multimedia key : `Stop`	Stop the playback
Multimedia key : `Next`	Next file
Multimedia key : `Previous`	Previous file
Multimedia key : `Pause`	Pause
Multimedia key : `Mute`	Toggle Mute/Unmute
`Ctrl`+Multimedia key : `Next`	Next folder
`Ctrl`+Multimedia key : `Previous`	Previous folder

System Requirements

The following lists the minimum system requirements for using Generic Remote Control software:

Microsoft Windows XP (SP3 or later), Windows VISTA, Windows 7, Windows 8, Windows 8.1 or Windows 10 - 32-bit or 64-bit.
Intel or AMD processor - 1.6 GHz or faster.
512 MB RAM, 2 Go recommended with Windows VISTA, Windows 7, Windows 8, Windows 8.1 or Windows 10.
50 MB hard-disk space for program installation.
XVGA Video (1024x768) or higher.

Installation

The install utility creates all necessary folders and copies all files required by Generic Remote Control software on your computer.

Download the install utility from our Web site.
Double-click the file, and then follow the on-screen prompts to install the appropriate version of Generic Remote Control for your computer.